| 1/10 Scale Nitro | Sportsman Stock | Touring Stock |
| 1/10 Scale Stock Electric | Pro Sportsman Stock | Touring Modified |
| 1/10 Scale Spec Electric | 4:1 Limited Stock | 1/12 Road Course |
| Pro Stock | ||
| Legends | ||
| Pro Legends | ||
| QSAC 1/4 Scale | ||
| 1/10 Nitro Oval |
| 1/10 Scale Nitro Gas | |
| 1/10 Scale Stock Electric | |
| 1/10 Scale Spec Electric | |
| THESE RULES ARE BEING UPDATED….. |
OVAL CLASSES
Sportsman Stock
1. Any 1/10 scale oval chassis. Body must be NASCAR style only.
2. Street Spec Motor and full faced “S” brushes with stock springs only.
3. Motors may use battery plugs or direct solder connections.
4. 6 cell Street Spec batteries only.
5. Any style of battery plugs may be used on battery to speed control connection
6. List price of electronic speed controller must not exceed $140.
7. Cars will run a fixed gear ratio of 4:1 (ex. 120 spur/30 pinion or 108/27, 100/25…)
8. Spur and pinion gears should have number of teeth clearly marked.
9. All windows must remain clear and in place.
10. Rear window holes permitted for wing wire penetration.
11. Rear of car must be in place down to the bumper.
12.Wings are optional. Max spoiler height is 2″ from trunk lid.
13. Tires: BSR Spec radials onlyPro Sportsman Stock
1. Any 1/10 scale oval chassis. Body must be NASCAR style only.
2. Street Spec Motor, any brand full faced brush, any springs .
3. Motors may use battery plugs or direct solder connections.
4. 6 cell Street Spec batteries only.
5. Any style of battery plugs may be used on battery to speed control connection
6. Cars will run a fixed gear ratio of 4:1 (ex. 120 spur/30 pinion or 108/27, 100/25…)
8. All windows must remain clear and in place.
9. Rear window holes permitted for wing wire penetration.
10. Rear of car may be cut out.
11.Wings are recommended.
12.Tires: Any brand or stagger radials or foams.4:1 Limited Stock
1. Any 1/10 scale oval chassis. Body must be NASCAR style only.
2. Any Rebuildable 27 turn fixed timing stock motor. (Paradox or equal)
3. Motors may use battery plugs or direct solder connections.
4. 6 cell Sub-C batteries only.
5. Batteries may use plugs or be “hard-wired”.
6. Cars will run a fixed gear ratio of 4:1 (ex. 120 spur/30 pinion or 108/27, 100/25…)
7. All windows must remain clear and in place.
8. Rear window holes permitted for wing wire penetration.
9. Rear of car may be cut out.
10.Wings are recommended.
11.Tires: Any brand or stagger radials or foams.ROAR Stock
1. Any 1/10 scale oval chassis. Body must be NASCAR style only.
2. Any ROAR approved 27T 24D stock motor.
3. Motors may use battery plugs or direct solder connections.
4. 6 cell Sub-C batteries only.
5. Batteries may use plugs or be “hard-wired”.
6. Gear ratio is drivers choice
7. All windows must remain clear and in place.
8. Rear window holes permitted for wing wire penetration.
9. Rear of car may be cut out.
10.Wings are recommended.
11.Tires: Any brand or stagger radials or foams.4-Cell Stock Legends
1. Bolink Legends cars and bodies only.
2. AM Band radios only. NO FM or PCM radios permitted.
3. Legends/Street Spec Motors & full face Spec brushes only.
4. Foam or Radial tires permitted.
5. Bushings only.
6. Front springs may be changed.
7. 4-cell Legends or Street Spec batteries only any plugs on battery/speed control.
8. Gear ratio per Bolink Rules 81/22.
9. Front steering rods may be changed.
10.Rear hubs may be changed to aluminum style.
11. All other Bolink rules apply.4-Cell PRO Legends
1. Bolink Legends cars and bodies only.
2. AM Band radios only. NO FM or PCM radios permitted.
3. Legends/Street Spec Motors, any compound full faced brushes.
4. Foam or Radial tires permitted.
5. Bushings or bearings permitted.
6. Front springs may be changed.
7. 6-cell Legends or Street Spec batteries only with any style plug on battery/speed control.
8. Gear ratio per Bolink Rules may be changed.
9. Front steering rods may be changed.
10.Rear hubs may be changed to alum. style.
QSAC Quarter Scale Check out the Q-Scale Page
1. Any QSAC recognized oval chassis. Body must be NASCAR or NASTRUCK style only.
2. 1.25 or 2.0 hp engines of 23 cc displacement only.
3. QSAC car and engine rules apply.
4. Proof of QSAC membership is required before car is placed on the track.
5. Cars must have reliable working brake systems.
6. Cars will be required to pass tech inspection before being run on the track.
7. Chassis and all its components must fit completely beneath the body.
8. For additional requirement and specifications refer to the QSAC Rules Handbook.
9. Depending on class sizes, 2.0 hp cars may be required to run track supplied restrictor plate.1/10 Scale Gas
1. Any 1/10 scale oval chassis. Body must be NASCAR style only.
2. 0.12 size glow fuel engine.
3. Mufflers or Tuned pipes acceptable but subject to review by the race director if deemed too loud.
4. Fuel tank and system must not leak.
5. All windows on bodies must remain clear and in place.
6. Rear window holes permitted for wing wire penetration.
7. Rear of car may be cut out.
8.Wings are recommended.
9.Minimum weight is 48 oz.
10.Cars must have reliable working brake systems.